Electroswitch Series 24 CSR/SD, SCADA Disable Control Switch Relay
"Image is Representative of Model Series"

Electroswitch Series 24 CSR/SD, SCADA Disable Control Switch Relay

Contact us for quote

The Electroswitch Series 24 CSR/SD, Control Switch Relay with SCADA Disable, operates like a standard CSR, allowing both SCADA and manual operation. Pushing in the handle disables remote operation leaving only Local/Manual operation possible. This action allows testing, and service to be performed safely. In addition, electrical connections (15 amp, 600 volt) are provided for the 2 N/C and N/O contacts at the terminal block deck located at the rear of the CSR/SD. These can be used to provide customer status indication.

Features

  • Handle pulls out 3/8” to allow remote operation of the CSR from SCADA, as well as local/manual operation
  • When the CSR handle and shaft is pushed in, the remote operation of the CSR is disabled, and only local/manual operation remains possible
  • The CSR remains in the “Normal” position, vertical at 0 degrees
  • 2 N/O and 2 N/C lateral contacts are provided and will operate via the 3 /8“ axial movement (push/pull) of the CSR/SD handle shaft
  • Target flag agreement is always true regardless of remote or local mode

Applications

  • Power Industry
  • Electrical Power Transmission Substations
  • Protects Critical Utility Equipment and Systems
  • Industrial Applications